LUMATEK Control Panel Plus (HID+LED) is a controller for the lighting of our indoor crops, either with HPS, CMH or Lumatek brand LEDs. Up to 400 HID devices (HPS-CMH) or 100 LED devices can be controlled in 2 different rooms or in the same room. It has the functions of on and off, sunrise and sunset, temperature control for safety and power regulator.
Warning: Last items in stock!
The LUMATEK Control Panel PLUS (HID+LED) is a dual signal digital lighting controller that offers precise external control of your Lumatek lighting fixtures, drivers and ballasts. Using innovative technology, this controller smartly monitors your grow room temperatures, light timing & intensity automation, safety-controlled dimming and switching On/Off. Simply connect it to your Lumatek Controllable Fixtures, Drivers or Ballasts and easily regulate your grow room environment.
The Lumatek Control Panel Plus 2.0 is a dual signal twin channel digital lighting controller with each of the two channels (Zones) capable of controlling up to 200 Lumatek controllable HID fixtures or ballasts with a digital RS485 signal or up to 50 LED drivers with analog 0-10V signal. It is possible to use each Zone to control fixtures in two independent separate rooms or to control up to 400 fixtures in one room with two different light source types.
Each Channel (Zone) can control same-powered ballasts/drivers; Zone A can control the same-powered ballasts/drivers as Zone B or Zone B can be set to control different powered ballasts/drivers eg: Zone A can be set to control 600W LED fixtures and Zone B set to control 600W or 315W HID ballasts.
2 independent channels, to control 2 rooms with the same controller. Each channel must have ballasts of the same power and technology.
Controls Lumatek 315W, 600W, 630W and 1000W controllable HID (Sodium - CMH) ballasts, up to a maximum of 400 ballasts (200 ballasts per channel, 200 Zone A and 200 Zone B)
Controls controllable 465W, 600W and 1000W Lumatek Zeus LED fixtures, up to a maximum of 100 fixtures (50 fixtures per channel, 50 Zone A and 50 Zone B)
Dual signal RS485 digital for HID and analog protocol 0-10V for LED
Automates the on and off of grow lamps per channel (room)
Regulates the power of all the luminaires connected per channel from the controller in 1% steps
It allows the simulation of sunrise and sunset, the controller increases or decreases the intensity in a range of 0 to 30 minutes.
Temperature control and shutdown system for safety, we assign the controller a maximum temperature per room so that upon reaching a certain temperature our lighting equipment turns off or reduces its intensity.
1 x Lumatek Control Panel Plus
1 x Power adaptor and cable
2 x Temperature sensor 5m cable
2 x HID control link cable 5m
2 x LED control link cable
No customer reviews for the moment.
1 750,00 €
1 649,00 €
1 450,00 €